Retaining ring is a kind of retaining ring, which is very widely used now. It is loved by the public because of its easy installation and strong endurance. So what is a resilient retaining ring? How is it installed? Let's take a look with the manufacturers of Haian retaining ring!

What is a retaining ring?

Circlips are industrial fasteners that can be used to fix matching components or assemblies together. The circlip is a round part made of metal, which is installed in the groove (housing or shaft). You can use internal (housing) circlips or external (shaft) circlips. As the name implies, the inner retaining ring is installed in the housing groove, and the outer retaining ring is installed in the shaft groove

Circlips are used for shafts and holes. Their structural characteristics are as follows: Circlips for shafts are installed on the shaft groove and used for the positioning and fixing of shaft end parts. They can withstand severe vibration and impact loads. , But need to take anti-loose measures and installation positioning; the hole is installed in the circular hole with an elastic retaining ring, which is used to fix the axial movement of the parts. The outer diameter of this kind of retaining ring is slightly larger than the diameter of the assembly circular hole.

The circlip is an industrial accessory that can support, buffer, brake, height adjustment and angle adjustment. The inner diameter of the elastic retaining ring for the shaft is slightly smaller than the diameter of the assembly shaft when the elastic retaining ring for the hole is selected. The surface and retaining ring are fixed to have a higher centering degree.

Current installation method of retaining ring:

1. Most of them are installed with circlip installation pliers; 2. Simple installation aids; 3. Automatic circlip installation machine.

The disadvantages of the installation methods of these circlips:

1. If the manual installation is uneven, the elastic retaining ring will be plastically deformed, which will cause the elastic retaining ring to fail; 2. Complicated parts cannot be positioned, and the production efficiency is low; 3. Simple installation aids are only suitable for installation The parts are generally not universal and have limitations; 4. The automatic circlip installation machine has a complicated structure and a high cost.